X'Treme Duty OBA For up to 37" Tires
P/N 10009
150 PSI / 2.68 CFM
VIAIR’s X’treme Duty Onboard Air System is a pre-packaged compressed air solution that provides two 350C, 100% duty cycle compressors, a 2.0 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more.
Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.
Included Parts:
- 2.0 Gallon VIAIR Air Tank
- (2) 350C VIAIR Compressors
- 30ft. Coil Hose with Quick Connects
- Tire Inflation Gun with 200 PSI Gauge
- Dash Panel Gauge with ON/OFF Switch
- 0-220 PSI Pressure Regulator
- Blow Gun Air Tool
- Sealed Pressure Switch (110 PSI on, 145 PSI off)
- (2) 40-amp Relays
- (2) T-Fittings (1/4†(M) x 1/4" (F) x 1/8†(F))
- 1/4†Quick Connect Stud (F)
- 1/4†Quick Connect Coupler (F)
- 1/4†175 PSI Safety Valve
- 1/4†Drain Cock
- (2) 1/8†BSP to 1/4†NPT
- (4) 1/4†Compression Fittings
- 20ft. 12-Gauge Wire with Inline Fuse Holder
- 4†Strip of Continuous Grommet Material
- Accessory Airline
- Electrical Connections
All Fittings are NPT rated unless otherwise noted.
