Constant Duty OBA For up to 37" Tires
P/N 10007
150 PSI / 1.66 CFM
VIAIR’s Constant Duty Onboard Air System is a pre-packaged compressed air solution that provides a 100% duty cycle 450C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires.
Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.
Included Parts:
- 2.5 Gallon VIAIR Air Tank
- 450C VIAIR Compressor
- 35ft. Coil Hose with Tire Chuck
- Dash Panel Gauge with ON/OFF Switch
- Pressure Switch with Relay (110 PSI on, 145 PSI off)
- Reducer: 1/8†(F) to 1/4†(M)
- 1/4†Quick Connect Stud (F)
- 1/4†Quick Connect Coupler (F)
- 1/4†175 PSI Safety Valve
- 1/4†Drain Cock
- (3) 1/4†Compression Fittings
- 20ft. 12-Gauge Wire with Inline Fuse Holder
- 4†Strip of Continuous Grommet Material
- Accessory Airline
- Electrical Connections
All Fittings are NPT rated unless otherwise noted.
